Our drapery panels can be customized to any size that meets your needs. Should you have any question about your drapes measurements, please feel free to contact us at sales@CurtainsDrapesFactory.com
|
|
|
|
| Replacing existing drapes: |
| |
• Simply measure one drape panel for the width and length, then multiply the width by two to get the total width for the pair.
|
|
 |
|
|
| First time installation: |
| |
•We recommend that you should install the hardware before you take your measurements
|
|
| |
•The rod should be positioned at least 4 inches above the window (so pleats are not seen from the outside) |
|
|
|
|
| Measuring the width: |
| |
• Measure the rod width, including the corners (if you need the return), and add 4 inches so the center can overlap when the drapes are closed |
|
| |
• Select proper width from chart below |
|
|
|
|
| Pleated Drapery Panel |
|
|
|
|
|
|
| |
1) French pleat
2) Parisian pleat
3) Inverted pleat
4) Goblet pleat |
| |
Standard Widths |
|
After pleated measurement |
| |
Single width panel |
|
Approx. 25" |
| |
Width and a half panel
|
|
Approx. 38" |
| |
Double panel
|
|
Approx. 52" |
| |
Double width and a half panel
|
|
Approx. 65" |
| |
Triple width panel |
|
Approx. 77" |
| |
Triple width and a half panel |
|
Approx. 92 " |
| |
Four width panel |
|
Approx. 104" |
| |
Four width and a half panel |
|
Approx. 117 " |
| |
Five width panel |
|
Approx. 130 " |
| |
Five width and a half panel |
|
Approx. 143 " |
| |
Sixfold width panel |
|
Approx. 156 " |
|
|
|
|
|
|
| Non-Pleated Drapery Panel |
|
|
|
|
|
|
| |
1) Rod Pocket
2) Rod Pocket w/ 2”Flange
3) Flat
4) Bronze Grommet
5) Silver Grommet
6) Tab Top |
| |
Standard Widths |
|
Flat on top measurement |
| |
Single width panel |
|
Approx. 48" |
| |
Width and a half panel |
|
Approx. 72" |
| |
Double panel |
|
Approx. 96" |
| |
Double width and a half panel |
|
Approx. 120" |
| |
Triple width panel |
|
Approx. 144" |
| |
Triple width and a half panel |
|
Approx. 168 " |
| |
Four width panel |
|
Approx. 192 " |
| |
Four width and a half panel |
|
Approx. 216 " |
| |
Five width panel |
|
Approx. 240 " |
| |
Five width and a half panel |
|
Approx. 264 " |
| |
Sixfold width panel |
|
Approx. 288 " |
|
|
|
|
|
|
| Measuring the Length: |
|
|
|
|
|
|
| |
Rod Pocket Panels: |
|
Measure from the top of the pole to the floor
• Add ½” to 1” to this length for poles up
• Rod Take-Up refers to the amount of fabric that is required to shirr the fabric on the rod
• Your selected length will include the 3” pocket size
• Additional 4-6 inches for puddling if desired |
|
|
|
|
| |
Pleated Panels + Flat panels |
|
Measure from the bottom of the drapery ring to the floor.
• Additional 4-6 inches for puddling if desired |
|
|
|
|
| |
Grommet Panels |
|
Measure from the top of the pole to the floor.
• Add 1 ½ to this measurement for Grommet Placement.
• Additional 4-6 inches for puddling if desired |
|
|
|
|
| |
Tab Top Panels |
|
Measure from the top of the pole to the floor
• Add ½” to 1” to this length for poles up
• Your selected length will include the 3” tab
• Additional 4-6 inches for puddling if desired |
|
|
| |
|
| CurtainsDrapesFactory.com manufacturers all drapery using only the highest quality materials and processes, all of our natural materials including silk and linen may include some minor natural imperfections and dye-lot variations. For additional information, please contact us. |
|
|
|
|
|
